heat pumpIt is crucial that you communicate with your HVAC contractor North Myrtle Beach during this time when your heat pump is most needed.

Because heat pump issues and problems are almost always a part of the heating system’s 24-hour operation, this is why you need to be able to reach your contractor quickly. You should be able to contact your heat pump contractor quickly and easily if there is any problem.

Heat Pump Repair Tips

However, many homeowners need the assistance and services of an HVAC contractor in North Myrtle Beach. Your heating contractor may not be able to help you as quickly as possible. This is especially true if your heat pump isn’t starting. What should you do while waiting for the contractor to arrive at your home?

These are some things that you can do while you wait for your heat pump service provider.

1. Verify that your thermostat is on.

HVAC contractors agree that the thermostat is the main reason heating systems don’t start up. The thermostat needs to be charged or the batteries may need to be changed.

It could also be accidentally turned off while you were cleaning. Before calling a heating and cooling professional, ensure that you have checked your thermostat to make sure it is working properly.

Also, make sure to verify that the thermostat is set correctly. It could have been accidentally set while you were cleaning.

2. Make sure to check the power source of your heat pump.

Check the circuit breaker of your heating system to see if it has tripped. You might need to turn it off and contact your heating contractor if it has tripped. Also, you can check the heat pump’s power cord for damage or burn marks.

This could indicate an electrical short. If this is the case, it’s best to contact a professional immediately. To prevent further damage to your heating system and other appliances, you should turn off your main electrical switch while the service provider arrives.

3. Take a look at the blower compartment.

While you wait for your heating contractor  in North Myrtle Beach, it is worth checking for any signs of trouble in the blower compartment. Your heating system may not start if the blower isn’t working properly.

To indicate that the blower compartment is functioning, it has a green flashing indicator. The light should flash green if it’s not flashing, or it flashes in red instead of green. This indicates that there are problems with the blower motor and other components of the blower chamber.

In this instance, you need to turn off the heating system and blower chamber. You should not allow anyone to use the heating system until you have an HVAC contractor.

4. Check that the condensation pan of your heat pump is empty. Drain the reservoir if it is full.

Clogging could be the reason your reservoir is filling up quickly. Make sure you check your condensation pipes to make sure no obstructions are preventing water from flowing.

5. Check the gas supply.

You might need to check the gas supply if your heating system isn’t starting when it’s fueled with gas. You might not have enough gas to allow your heating system to start, or you may have gas supply problems.

Refuel if you don’t have enough gas to run your heating system. If you are not sure, contact your service provider immediately. You should make sure that no one is trying to use the heat pump in your home. This could lead to even more serious problems.

Proper care for your heat pump system is essential. Regular maintenance and proper maintenance are key to prolonging the life of your heating equipment. These are just a few of the other tips that professional heat pump contractors can give you to take care your heating system.

You should not change the thermostat’s temperature settings constantly. This will not only result in higher energy bills but can also cause damage to your thermostat. Without a functioning thermostat, your heating system wouldn’t work properly.

Your thermostat should not be set to maximum heating. This will not heat your home faster. This will cause your heat pump to work more quickly and consume more electricity, which can lead to higher utility bills at the end the month.

A programmable thermostat will allow you to easily set and maintain the temperature in your home. You can also save money on your utility bills by installing a programmable thermostat.

Your outdoor heat pump should be placed above the ground and away from any gutters. Your heat pump could be damaged by water from your gutter, which can cause it to stop working efficiently.

To prevent dirt and debris from blocking the airflow, your heat pump should be at least 4-8 inches above the ground. The drainage can also be properly installed and set up with enough space.

To prevent dust and debris buildup on your heat pump, clean it regularly. This will prevent clogging, which can cause a halt to smooth airflow. Make sure that your HVAC filters are free of dust and debris. You might need to clean your heat pump and filters more often during the winter season if you use your heating system for longer periods of time.

To remove clogs and large debris from your heat pump coils, do not use sharp or pointed objects. These objects can easily cause damage to your heat pump. You should call a professional if you are unable to remove the debris.

North Myrtle Beach Heating & Air is licensed and certified. Our team is always ready to help.

Like our Facebook page for more great info about HVAC.

North Myrtle Beach Heating & Air
1001 2nd Ave N
North Myrtle Beach, SC 29582

Serving: North Myrtle Beach, Barefoot Landing, Little River, Longs, Cherry Grove